Description
Polyvinylidene difluoride (PVDF) is a special plastic material from the fluoropolymer family, formed by the polymerization of vinylidene difluoride.
Description
Thin film is referred to the several layer of material having thickness ranging from nanometer to micrometer.
Decorative laminates are laminated products primarily used as furniture surface materials or wall paneling. It can be manufactured as either high- or low-pressure laminate, with the two processes not much different from each other except for the pressure applied in the pressing process.
Decorative High-pressure Laminate (HPL) is composed of resin-impregnated Kraft paper, decorative paper face material and a clear melamine-impregnated overlay. These sheets are bonded at pressures greater than 1000 pounds per square inch and temperatures approaching 300 F (149°C).
Cyclopentane is a highly flammable alicyclic hydrocarbon with chemical formula C5H10, consisting of a ring of five carbon atoms each bonded with two hydrogen atoms above and below the plane. It occurs as a colorless liquid with a petrol-like odor. Its melting point is  94 °C and its boiling point is 49 °C.
CIPP, is one of several pipe rehabilitation methods referred to as Trenchless Technologies. It is an approved method and preferred method to rehabilitating cracked, broken and failed sanitary or storm sewer pipes. Lining is less expensive and more efficient than traditional open cut replacement methods, normally installed with little or no surface disruption. CIPP lining process can be used to rehabilitate virtually any type of pipe including; Clay, Cast Iron, Orangeburg, PVC, ABS, HDPE, Concrete Pipe or Corrugated Metal Pipe.
CLA (short for "Conjugated Linoleic Acid") is a fatty acid that belongs to the latter group. CLA is actually one of the most popular weight loss supplements in the world, and some believe that it can have other health benefits as well.
Concrete joints are used to compensate when concrete expands or shrinks with changes in temperature. Concrete joints are normally used to prevent cracks when the concrete shrinks by creating forming, tooling, sawing and placing joint formers. The pre-planned cracks will provide a better finish concrete product and will be formed in specific locations where those cracks could be monitored. Sometimes because of the material and width or span of the concrete joints are required to improve the performance of the material and allow the materials to expand/contract or move without damaging other structures.
Description
Silicon nanowires also signified as SiNWs, are a type of nanowire most often formed from a silicon precursor by etching of a solid or through catalyzed growth from a vapor or liquid phase.
Coal tar is derived from coal. It is a byproduct of the production of coke, a solid fuel that contains mostly carbon, and coal gas. Coal tar is used primarily for the production of refined chemicals and coal-tar products, such as creosote and coal-tar pitch.